English
简体中文
Register
Developer Platform
Docs
Explore
Build end-to-end business solutions for IoT brands
English
简体中文
Register
Developer Platform
Language
English
English
简体中文
Contact Us
Register
Log In
Go to main website
Developer Platform
Search By Document Directory
Q&A
Last Updated on：2025-08-14 09:43:41
This page contains content
- Does the BK7231N full-color bulb product development kit support infrared?
- BK7231N infrared transmission and reception pins are not responding?
- Which function can be called to refuse a firmware upgrade?
- How to get the time zone registered by the device?
- T3-U serial port 1 is used as a normal IO. Why can't it start after TX1 is connected?
- How does T1 enter the rtos critical section?
- How to set the duty cycle of T3?
- What is the acquisition range of T3 ADC?
- What is the T1-ADC reference voltage?
- How to erase FLASH of BK7231N?
- How does T3 call the production test serial port as a normal serial port?
- How to permanently open the binding window of the Bluetooth remote control in TuyaOS?
- How to close the Bluetooth remote control binding window in TuyaOS?
- What is the maximum PWM frequency of CBU 7231n?
- Is there an interface in the SDK for TuyaOS to actively disconnect Wi-Fi when developing Wi-Fi devices?
- How to obtain the product development kit?
- How to check the serial port number in a Linux system?
- How to change the language of text returned by the agent?
- How to modify the baud rate of log output for TuyaOS development T3?
- How to modify the log serial port baud rate in T5 AI Wukong SDK?
- How to authorize the development of connected products with TuyaOS?
- How to modify the log serial port in TuyaOS T3 development?
- How to distinguish between unbinding and unbinding apps and clearing data in TuyaOS?
- What to do if TuyaOS BK7231N us delay is inaccurate?
- How does TuyaOS report the MCU version number?
- Why is it possible to request the current temperature and humidity but not the highest and lowest temperature weather data?
- How to implement us delay in TuyaOS?
- How often is the device log reported?
- How to obtain the Wi-Fi network status?
- What is the reference voltage for the CBU's ADC?
- Does Tuya Wi-Fi module support customers to develop additional Wi-Fi communication protocol?
- How to disable the log function in TuyaOS on BK7231N?
- When does using the authorized serial port in a TuyaOS networked end product application not affect authorization?
- How to use the log serial port as a regular serial port on BK 7231N?
- The timeout for TuyaOS network configuration is set to 30 seconds, but why does it actually take 1 minute to timeout during testing?
- How to perform flash operations on a module using the BK7231N platform?
- How long does it take for the Wi-Fi module to reconnect after being disconnected from the network?
- What is the maximum voltage that the ADC of BK7231N can collect?
- Why does the frontend of Tuya Developer Platform not provide resistor and pin options of BL0942/HLW8032 chips for selection?
- Which function is used to test IO for secondary development with Wi-Fi SDK?
- RTL8720DN How to use the original factory tool for burning?
- TuyaOS How to parse the DP point data of the networking single product framework?
- Which function is used to get Wi-Fi network status for secondary development with Wi-Fi SDK?
- What can I do if the calibration of power consumption statistics fails?
- What are the SDK compilation environment requirements provided by Tuya?
- There is no pre_App_init when compiling the SDK provided by Tuya?
- Why did the SDK provided by Tuya fail to compile?
- Does the SDK provided by Tuya use RTOS?
- How to locate the issue when Fatal error appears in the log printed?
- What do i need to prepare for secondary development based on Wi-Fi SDK?
- Which version is the security baseline based on?
- How does the Wi-Fi module respond if it is disconnected from the network?
- Which function of the demo program is easy to start with in the Wi-Fi SDK for secondary development?
- Which function is used to get the device status for secondary development with Wi-Fi SDK?
- With Wi-Fi SDK secondary development, what parameters can I choose to set the Wi-Fi configuration mode?
- Which function is used to reset the network status for secondary development with Wi-Fi SDK?
- How to download secondary development files compiled by Wi-Fi SDK to the chip?
- What are the power consumption metering chips currently in use?
- In the custom development of the Wi-Fi & Bluetooth LE module BK7231N based on the TuyaOS SDK, which API is called for software resetting?
- How do I obtain the RSSI signal strength of the CBU module in its custom development?
- I paired a product by using Bluetooth directly without using Wi-Fi. However, after I copied the device information and generated a new PID, it could not be paired that way. Why?
- The default mode of each GPIO port of the CBU module on the first power-up is what?
- Does BK7231N support flash read protection?
- How are the 8285 chip high-temperature and low-temperature versions different?
Marketing Cooperation
Business Cooperation
Customer Service
Media Inquiry
© 2026 Tuya Inc.
English
English
简体中文