TYWE5P Module Datasheet

Last Updated on : 2023-06-05 02:27:30download

Product Overview

After a period of service, this module will become deprecated due to product upgrades and iterations, user requirements, production inventory, or other reasons. To improve the compatibility of your smart devices and minimize the impact on your use, Tuya continues to provide webpage documentation of deprecated modules, but no longer maintains or updates the documentation. The content herein is for reference only.
If you have any questions, submit a ticket to contact Tuya or consult Tuya’s account manager to request support.

TYWE5P is a low-power built-in Wi-Fi module developed by Hangzhou Tuya Information Technology Co., Ltd. It consists of a highly integrated radio frequency chip (ESP8266) and several peripheral components, with a built-in Wi-Fi network protocol stack and robust library functions. TYWE5P is embedded with a low-power 32-bit CPU, 1 MB flash, 50 KB SRAM, and robust peripheral resources.

TYWE5P is an RTOS platform that integrates all the function libraries of the Wi-Fi MAC and TCP/IP protocols. You can develop built-in Wi-Fi products as required.

Figure 1 shows the schematic diagram of TYWE5P. TYWE5P Module Datasheet

Figure 1 TYWE5P schematic diagram

Features

  • Built-in low power-consuming 32-bit CPU functioning as an application processor

    Basic frequency: 80 MHz and 160 MHz

  • Working voltage: 3.0 V to 3.6 V

  • Peripherals: nine GPIOs and one UART

  • Wi-Fi connectivity

    • 802.11 b/g/n

    • Channels 1 to 14@2.4 GHz

    • WPA/WPA2 security mode

    • Up to +20 dBm output power in 802.11b mode

    • STA/AP/STA+AP working mode

    • SmartConfig and AP network configuration modes(for Android and iOS devices)

  • Onboard PCB antenna

  • Working temperature: –20°C to +125°C

Major Application Fields

  • Intelligent building
  • Intelligent home and household appliances
  • Intelligent socket and smart lighting
  • Industrial wireless control
  • Baby monitor
  • Network camera
  • Intelligent bus

Module Interfaces

Dimensions and Pin Layout

TYWE5P provides two rows of pins with a distance of 2 mm between every two pins.

TYWE5P dimensions: 16 mm (W) x 24.74 mm (L) x 3.5 mm (H). Figure 2 shows the overall pin layout of TYWE5P.
TYWE5P Module Datasheet

Figure 2 Front and back views of TYWE5P

Pin Definition

Table 1 describes the interface pins.

Table 1 TYWE5P interface pins

No. Symbol I/O Type Function
1 TXD0 O UART0_TXD (1)
2 GPIO5 I/O GPIO_05
3 RXD0 I/O UART0_RXD (1)
4 GPIO4 I/O GPIO_04
5 GND P Power supply reference ground pin
6 GPIO0 I/O GPIO_0 (Used during module power-on and initialization. Use it with caution.)
7 VCC P Power supply pin of the module (3.3 V)
8 GPIO2 O UART0_TXD (used for printing the internal information of the module)
9 GPIO15 O GPIO_15 (Used during module power-on and initialization. Use it with caution.)
10 GPIO13 I/O GPIO_13
11 GPIO12 I/O GPIO_12
12 GPIO14 I/O GPIO_14
13 GPIO16 I/O GPIO_16 (Connect it to a 10 KΩ pull-up resistor.)
14 EN I Module enablement pin. Connect it to 3.3 V power supply. (The module has been connected to a pull-up resistor.)
15 RST I/O Hardware reset pin (It is valid at low level and has been connected to a pull-up resistor.)

Note:

  • P indicates power-supply pins, I/O indicates input/output pins, and AI indicates analog input pins.
  • RST is only a hardware reset pin of the module, which cannot clear the Wi-Fi network configuration.
  • UART0 is a user serial port. When the module is powered on and started, data is exported from the serial port, which can be ignored.

Electrical Parameters

Absolute Electrical Parameters

Table 3 Absolute electrical parameters

Parameter Description Minimum Value Maximum Value Unit
Ts Storage temperature –20 85 °C
VIN Power supply voltage –0.3 3.6 V
Static electricity voltage (human model) TAMB – 25°C - 2 kV
Static electricity voltage (machine model) TAMB – 25°C - 0.5 kV

Electrical Conditions

Table 4 Normal electrical conditions

Parameter Description Minimum Value Typical Value Maximum Value Unit
Ta Working temperature –20 - 125 °C
VCC Working voltage 3.0 3.3 3.6 V
VIL I/O low-level input –0.3 - VCC x 0.25 V
VIH I/O high-level input VCC x 0.75 - VCC V
VOL I/O low-level output - - VCC x 0.1 V
VoH I/O high-level output VCC x 0.8 - VCC V
Imax I/O drive current - - 12 mA

Wi-Fi TX Power Consumption

Table 5 TX power consumption during constant emission

Symbol Mode Rate TX Power Typical Value Unit
IRF 11b 11 Mbit/s +17 dBm 220 mA
IRF 11g 54 Mbit/s +15 dBm 110 mA
IRF 11n MCS7 +13 dBm 100 mA

Wi-Fi RX Power Consumption

Table 6 RX power consumption during constant receiving

Symbol Mode Rate Typical Value Unit
IRF 11b 11 Mbit/s 70 mA
IRF 11g 54 Mbit/s 70 mA
IRF 11n MCS7 70 mA

Power Consumption in Working Mode

Table 7 TYWE5P working current

Working Mode Working Status (Ta = 25°C) Average Value Maximum Value Unit
EZ mode The module is in the EZ state and the Wi-Fi indicator fast flashes. 80 151 mA
AP mode The module is in the AP state and the Wi-Fi indicator slowly flashes. 90 451 mA
Connection mode The module is in the connected state and the Wi-Fi indicator is steady on. 58.5 411 mA
Disconnection mode The module is in the disconnected state and the Wi-Fi indicator is steady off. 80 430 mA

RF Features

Basic RF Features

Table 8 Basic RF features

Parameter Description
Frequency band 2.412 GHz to 2.484 GHz
Wi-Fi standard IEEE 802.11 b/g/n (channels 1 to 14)
Data transmission rate 11b: 1, 2, 5.5, 11 (Mbit/s) 11g: 6, 9, 12, 18, 24, 36, 48, 54 (Mbit/s) 11n: HT20 MCS0 to MCS7
Antenna type PCB antenna

Wi-Fi Output Performance

Table 9 TX power during constant emission

Parameter Minimum Value Typical Value Maximum Value Unit
RF average output power, 802.11b CCK mode 1 Mbit/s - 20 - dBm
RF average output power, 802.11g OFDM mode 54 Mbit/s - 17 - dBm
RF average output power, 802.11n OFDM mode MCS7 - 14 - dBm
Frequency error –10 - 10 ppm

Wi-Fi RX Sensitivity

Table 10 RX sensitivity

Parameter Minimum Value Typical Value Maximum Value Unit
PER < 8%, RX sensitivity, 802.11b CCK mode 1 Mbit/s - –91 - dBm
PER < 10%, RX sensitivity, 802.11g OFDM mode 54 Mbit/s - –75 - dBm
PER < 10%, RX sensitivity, 802.11n OFDM mode MCS7 - –72 - dBm

Antenna Information

Antenna Types

Only the onboard PCB antenna is used.

Antenna Interference Reduction

When using an onboard PCB antenna on a Wi-Fi module, make sure that the antenna on the module is at least 15 mm away from other metal parts to ensure optimal wireless performance.

To prevent a negative effect on antenna performance, do not route copper or cable wires along the antenna area of the user PCB board.

For details about the area of the onboard PCB antenna on a module, see Figure 3.

Production Instructions

Mechanical Dimensions

TYWE5P Module Datasheet

TYWE5P Module Datasheet

Figure 3 Mechanical dimensions of TYWE5P

TYWE5P Module Datasheet

Figure 4 TYWE5P side view

Recommended PCB Encapsulation

TYWE5P Module Datasheet

Figure 5 TYWE5P schematic diagram and pin connection

TYWE5P Module Datasheet

Figure 6 PCB encapsulation diagram of TYWE5P

Production Instructions

Storage conditions of a delivered module are as follows:

  1. The anti-moisture bag must be placed in an environment where the temperature is under 30°C and the relative humidity is under 85%.
  2. The shelf life of a dry-packaged product is six months from the date when the product is packaged and sealed.

Note:

  1. Throughout the production process, each involved operator must wear an electrostatic ring.
  2. During the operation, strictly protect the module from water and strains.

Recommended Oven Temperature Profile

TYWE5P Module Datasheet