#General-White Light

#Function Introduction

#Brightness Value

• Brightness adjustment has a gradient effect by default, and the gradient time from 1% brightness to 100% brightness is 800ms.
• Brightness adjustment range: 1%-100%, the range of values ​​sent by the panel: 10-1000, the brightness adjustment range and the value sent by the panel are linearly corresponding.
• On the development-free platform, the maximum value of white light brightness defaults to 100%, and the minimum value of white light brightness defaults to 10%, which supports self-setting. It is recommended not to set the minimum value of white light brightness below 10% to avoid the situation where the light goes out when adjusted to the lowest brightness.
• Brightness conversion [formula] (/en/miniapp/panels/extended/utils/number#%E8%BD%AC%E6%8D%A2%E6%95%B0%E5%80%BC).

#Warm and cold values

• The common color temperature range of bulbs is: 2700K-6500K. The higher the color temperature, the colder the corresponding color.
• Color temperature adjustment range: 0%-100%, the range of values ​​sent by the panel: 0-1000, the color temperature adjustment range and the value sent by the panel are linearly corresponding.

#Number of color light channels supported

• One channel
• Two channels

#DP protocol

#How to develop

• Monitor, report and send DP according to UI interaction
  • Specific monitoring and sending examples

#Notes

• None

#Related materials

• [Function page]:
  • None
• [Components]:
  1. Regular touch slider
  2. Regular percentage slider
  3. Vertical touch slider
  4. Vertical percentage slider
  5. Regular brightness slider
  6. Color temperature slider
  7. Rectangular color temperature color palette
  8. Circular color temperature color wheel
• [Tutorial]:
  • None
• [API]:
  • None