Motion Sensor
Last Updated on : 2023-09-07 10:23:11download
Zigbee basics
| Parameter | Value |
|---|---|
| Profile ID | 0x0104 |
| Device ID | 0x0402 |
Endpoint
| Endpoint | Description |
|---|---|
| 1 | The endpoint used by the current motion sensor. |
Supported clusters
| Input clusters (server) | Output clusters (client) |
|---|---|
| Basic (0x0000) | OTA Upgrade (0x0019) |
| Power Configuration (0x0001) | / |
| IAS Zone (0x0500) | / |
Supported attributes and commands
Basic cluster
Attributes
| ID | Name | Data type (ID) | Range | Default |
|---|---|---|---|---|
| 0x0000 | ZCLVersion | uint8 (0x20) | 0x00 to 0xff | 0x03, used for connection to Tuya-enabled Zigbee gateways. |
| 0x0001 | ApplicationVersion | uint8 (0x20) | 0x00 to 0xff | 0x40 0x40 in hex is 0100 0000 in binary. 0100 0000 represents version 1.0.0, so 0x40 represents 1.0.0. |
| 0x0002 | StackVersion | uint8 (0x20) | 0x00 to 0xff | 0x02 |
| 0x0003 | HWVersion | uint8 (0x20) | 0x00 to 0xff | 0x01 |
| 0x0004 | ManufacturerName | string (0x42) | 0 to 32 bytes | For example, _TZ3000_l6web2ir.The value of this attribute is 16 bytes in length, containing 8-byte prefix of capability value and 8-byte PID. The PID is the unique identifier of the Zigbee product you create on the Tuya IoT Development Platform. The capability value can be obtained from the Zigbee development documentation. |
| 0x0005 | ModelIdentifier | string (0x42) | 0 to 32 bytes | TS0202, used for connection to Tuya-enabled Zigbee gateways. |
| 0x0007 | PowerSource | enum8 (0x30) | 0x00 to 0xff | 0x03, used for connection to Tuya-enabled Zigbee gateways. |
| 0xFFFD | ClusterRevision | uint16 (0x21) | 0x0000 to 0xffff | 0x0001 |
Commands
| ID | Name | Direction | Description |
|---|---|---|---|
| 0x00 | Reset to Factory Defaults | Client to Server | / |
Power Configuration cluster
Attributes
| ID | Name | Data type (ID) | Range | Default |
|---|---|---|---|---|
| 0x0020 | Battery Voltage | uint8 (0x20) | 0x00 to 0xff | 0x00 |
| 0x0021 | Battery Percentage Remaining | uint8 (0x20) | 0x00 to 0xff | 0x00 |
| 0xFFFD | ClusterRevision | uint16 (0x21) | 0x0000 to 0xffff | 0x0001 |
IAS Zone cluster
Attributes
| ID | Name | Data type (ID) | Range | Default |
|---|---|---|---|---|
| 0x0000 | Zone State | enum8 (0x30) | 0x00 to 0xff | 0x00 |
| 0x0001 | Zone Type | enum16 (0x31) | 0x0000 to 0xffff | 0x000D |
| 0x0002 | Zone Status | bitmap16 (0x19) | 0x0000 to 0xffff | 0x0000 |
| 0x0010 | IAS CIE Address | EUI64 (0xF0) | 8 bytes | NULL |
| 0x0011 | Zone ID | uint8 (0x20) | 0x00 to 0xff | 0x0000 |
| 0xFFFD | ClusterRevision | uint16 (0x21) | 0x0000 to 0xffff | 0x0001 |
OTA Upgrade cluster
Attributes
| ID | Name | Data type (ID) | Range | Default |
|---|---|---|---|---|
| 0x0000 | UpgradeServerID | EUI64 (0xF0) | / | 0xffffffffffffffff |
| 0x0001 | FileOffset | uint32 (0x23) | / | 0x00000000 |
| 0x0002 | CurrentFileVersion | uint32 (0x23) | / | 0x00000000 |
| 0x0006 | ImageUpgradeStatus | enum8 (0x30) | / | 0x00 |
| 0x0007 | Manufacturer ID | uint16 (0x21) | / | 0x1002 |
| 0x0008 | Image Type ID | uint16 (0x21) | / | 0x1602 |
| 0x0009 | MinimumBlockPeriod | uint16 (0x21) | / | 0x0000 |
| 0xFFFD | ClusterRevision | uint16 (0x21) | 0x0000 to 0xffff | 0x0001 |
Commands
| ID | name | Direction | Description |
|---|---|---|---|
| 0x00 | Image Notify | Server to Client | / |
| 0x01 | Query Next Image Request | Client to Server | / |
| 0x03 | Image Block Request | Client to Server | / |
| 0x06 | Upgrade End Request | Client to Server | / |
Mapping between DPs and clusters
| DPID | DP description | Standard command |
|---|---|---|
| 1 | Human motion detection status | Yes |
| 4 | Battery level | Yes |
| 5 | Tamper alarm | Yes |
DP1 Human motion detection status
| Direction | Cluster ID | Attribute ID | Value |
|---|---|---|---|
| Server to client | 0x0500 | 0x0002 (ZoneStatus) | Bit0 (alarm1).
|
The sensor reports the alarm status when the sensor detects human motion and reports no alarm when it does not detect human motion.
DP4 Battery level
| Direction | Cluster ID | Attribute ID | Value |
|---|---|---|---|
| Server to client | 0x0001 | 0x0020 (BatteryVoltage) | 0x00 to 0xff |
| Server to client | 0x0001 | 0x0021 (BatteryPercentageRemaining) | 0x00 to 0xff |
If the reported value of BatteryVoltage is 30, it indicates 3.0V voltage. If the reported value of BatteryPercentageRemaining is 180, it indicates a battery level of 90%.
DP5 Tamper alarm
| Direction | Cluster ID | Attribute ID | Value |
|---|---|---|---|
| Server to client | 0x0500 | 0x0002 (ZoneStatus) | Bit2 (tamper).
|
The sensor reports the alarm status when the sensor detects tampering and reports no alarm when the alarm is canceled.
Default heartbeat (4 hours, report battery level)
For more information, see DP4 Battery level.
Is this page helpful?
YesFeedbackIs this page helpful?
YesFeedbackMarketing Cooperation
Business Cooperation
Customer Service
Media Inquiry
