Wi-Fi EZ Mode

Last Updated on : 2023-05-22 06:38:24download

This topic describes the Wi-Fi Easy Connect (EZ) or SmartConfig mode to pair devices. After a user connects a mobile phone to a router, the router broadcasting is used to communicate and pair with a target device. It is easy-to-use, but has compatibility requirements for mobile phones and routers. The success rate is lower than that of the hotspot or access point (AP) mode.

Pairing process

Wi-Fi EZ Mode

For iOS 14.5 and later, we recommend that you use the AP mode instead of the Wi-Fi EZ mode. The former trumps the latter when it comes to the following aspects:

  • Compared with the Wi-Fi EZ mode, the AP mode results in a higher success rate, optimal reliability, and fewer compatibility requirements for mobile phones and routers.
  • The app built with Xcode 12.5 cannot send the EZ pairing data packets from iPhone that runs iOS 14.5 or later. In this case, the permission com.apple.developer.networking.multicast must be enabled for the app. This permission must be approved by Apple before it can be enabled. As a temporary solution, you can use an earlier Xcode version, but the AP mode is still recommended.

Get a token

Before the Wi-Fi EZ pairing process, the SDK must get a pairing token from the cloud in the networked state. The token is valid for 10 minutes and expires immediately after the device is paired. A new token must be generated if the device needs to be paired again.

API description

- (void)getTokenWithHomeId:(long long)homeId
                   success:(TYSuccessString)success
                   failure:(TYFailureError)failure;

Parameters

Parameter Description
homeId The ID of the home with which the device is bound.
success The success callback with a pairing token returned.
failure The failure callback with an error message returned.

Example

ObjC:

- (void)getToken {
	[[TuyaSmartActivator sharedInstance] getTokenWithHomeId:homeId success:^(NSString *token) {
		NSLog(@"getToken success: %@", token);
		// TODO: startConfigWiFi
	} failure:^(NSError *error) {
		NSLog(@"getToken failure: %@", error.localizedDescription);
	}];
}

Swift:

func getToken() {
    TuyaSmartActivator.sharedInstance()?.getTokenWithHomeId(homeId, success: { (token) in
        print("getToken success: \(token)")
        // TODO: startConfigWiFi
    }, failure: { (error) in
        if let e = error {
            print("getToken failure: \(e)")
        }
    })
}

Callback of the pairing delegate

API description

- (void)activator:(TuyaSmartActivator *)activator didReceiveDevice:(TuyaSmartDeviceModel *)deviceModel error:(NSError *)error;

Parameters

Parameter Description
activator The instance of the TuyaSmartActivator object for pairing.
deviceModel The paired device model that is returned if the request is successful. nil is returned if the request failed.
error The error message that is returned if the request failed. nil is returned if the request is successful.

Start pairing

API description

- (void)startConfigWiFi:(TYActivatorMode)mode
                   ssid:(NSString *)ssid
               password:(NSString *)password
                  token:(NSString *)token
                timeout:(NSTimeInterval)timeout;

Parameters

Parameter Description
mode The pairing mode.
ssid The name of the target Wi-Fi network.
password The password of the target Wi-Fi network.
token The pairing token.
timeout The timeout value of a pairing task. Default value: 100. Unit: seconds.

Example

ObjC:

- (void)startConfigWiFi:(NSString *)ssid password:(NSString *)password token:(NSString *)token {
	// Implements the delegate method of `TuyaSmartActivator`.
	[TuyaSmartActivator sharedInstance].delegate = self;

	// Start Wi-Fi EZ pairing, in which `mode` is set to `TYActivatorModeEZ`.
	[[TuyaSmartActivator sharedInstance] startConfigWiFi:TYActivatorModeEZ ssid:ssid password:password token:token timeout:100];
}

#pragma mark - TuyaSmartActivatorDelegate
- (void)activator:(TuyaSmartActivator *)activator didReceiveDevice:(TuyaSmartDeviceModel *)deviceModel error:(NSError *)error {

	if (!error && deviceModel) {
		// The device is paired.
    }

    if (error) {
        // Failed to pair the device.
    }
}

Swift:

func startConfigWiFi(withSsid ssid: String, password: String, token: String) {
    // Implements the delegate method of `TuyaSmartActivator`.
    TuyaSmartActivator.sharedInstance()?.delegate = self

    // Starts pairing.
    TuyaSmartActivator.sharedInstance()?.startConfigWiFi(TYActivatorModeEZ, ssid: ssid, password: password, token: token, timeout: 100)
}

#pragma mark - TuyaSmartActivatorDelegate
func activator(_ activator: TuyaSmartActivator!, didReceiveDevice deviceModel: TuyaSmartDeviceModel!, error: Error!) {
    if deviceModel != nil && error == nil {
        // The device is paired.
    }

    if let e = error {
        // Failed to pair the device.
        print("\(e)")
    }
}

Stop pairing

After the pairing process is started, the app continuously broadcasts the pairing data until a device is paired or the process times out. To allow users to cancel or complete pairing during the process, you must call the API method [TuyaSmartActivator stopConfigWiFi] to stop pairing.

API description

- (void)stopConfigWiFi;

Example

ObjC:

- (void)stopConfigWifi {
	[TuyaSmartActivator sharedInstance].delegate = nil;
	[[TuyaSmartActivator sharedInstance] stopConfigWiFi];
}

Swift:

func stopConfigWifi() {
    TuyaSmartActivator.sharedInstance()?.delegate = nil
    TuyaSmartActivator.sharedInstance()?.stopConfigWiFi()
}