Last Updated on : 2023-05-24 10:22:43download
The following table describes the pin definition for the BTU module.
No. | Symbol | I/O type | Feature | Usage | Notes |
---|---|---|---|---|---|
1 | D3 | I/O | I/O | - | - |
2 | D7 | I/O | I/O | Pin demo – LED output | LED indicator on the microcontroller board |
3 | C0 | I/O | I/O | Application/I2C demo – SDA | SDA on the function board |
4 | SWS | I/O | SWS | SWS | - |
5 | B6 | I | ADC | ADC demo – ADC | ADC on the power supply board |
6 | A0 | I/O | I/O | Pin demo – Key-press input | Keys on the microcontroller board |
7 | A1 | I/O | I/O | Application demo – SHT3x alert | INT on the function board |
8 | C2 | I/O | PWM | - | - |
9 | C3 | I/O | PWM | Print logs | Log print is disabled by default. |
10 | D2 | I/O | PWM | - | Default to SDA. |
11 | B4 | I/O | PWM | - | Default to SCL. |
12 | B5 | I/O | PWM | PWM demo – PWM output | PWM5 |
13 | GND | P | GND | GND | - |
14 | VCC | P | VCC | VCC | - |
15 | B1 | I/O | TXD | UART demo – TX | The default setting, used for firmware flashing |
16 | B7 | I/O | RXD | UART demo – RX | The default setting, used for firmware flashing |
17 | C4 | I/O | ADC | - | - |
18 | RST | I/O | RST | RST | Reset button on the microcontroller board |
19 | C1 | I/O | I/O | Application/I2C demo – SCL | SCL on the function board |
20 | D4 | I/O | I/O | - | - |
21 | NC | I/O | Floating | - | - |
Is this page helpful?
YesFeedbackIs this page helpful?
YesFeedback