Firmware Configuration

Last Updated on : 2022-11-24 09:20:28download

This topic describes how to configure the firmware information for your aroma diffuser. For more information about product creation, see Create Products.

Parameter typesParameterDescription
Device pairingPairing button timeSet the time of button-press to trigger pairing, ranging from 1,000 ms to 5,000 ms.
Pairing timeSet the timeout period for pairing, which can be 3 or 10 minutes. If a device is not paired within the specified time, it will exit pairing mode.
Pairing reminder modeSet how the ambient light indicates the pairing mode.
Pairing reminder brightnessSet the brightness of the ambient light for indicating the pairing mode, ranging from 10 to 100.
Pairing reminder colorSet the color of the ambient light for indicating the pairing mode, which can be red, green, and blue.
Lighting configuration optionsColor modeYou can set five color modes from gorgeous, colorful, white, red, purple, blue, sky blue, green, and yellow. Users can press the light button to change the color mode.
Device pairingFrequency of PWMSet a frequency value between 100 to 20,000. The default value of 1,000 is recommended. A high or low frequency might cause flicker.
Red drive pinSelect a pin from the drop-down list. Note that the specified pin cannot be configured for other features.
Green drive pinSelect a pin from the drop-down list. Note that the specified pin cannot be configured for other features.
Blue drive pinSelect a pin from the drop-down list. Note that the specified pin cannot be configured for other features.
Frequency of PWM for atomizer discSet a frequency value between 100 to 20,000 according to your circuit design. Incorrect frequency might cause the atomizer disc to not work properly.
Atomization drive pinSelect a pin from the drop-down list. Note that the specified pin cannot be configured for other features.
No water light key pinDetect the falling edge to determine whether lack of water occurs. Select a pin from the drop-down list. Note that the specified pin cannot be configured for other features.
Fan drive pinSelect a pin from the drop-down list. Note that the specified pin cannot be configured for other features.
Buzzer typeChoose active buzzer or passive buzzer.
Active buzzer drive pinSelect a pin from the drop-down list. Note that the specified pin cannot be configured for other features. This parameter is used for active buzzers.
Passive buzzer drive pinSelect a pin from the drop-down list. Note that the specified pin cannot be configured for other features.
Frequency of PWM for passive buzzerSet a frequency value according to your circuit design. Incorrect frequency might cause the passive buzzer to not work properly.
Work drive pinWhen the atomizer disc is working, the indicator is on. Select a pin from the drop-down list. Note that the specified pin cannot be configured for other features.
The number of buttonsTwo or three buttons.
Light key pinThis parameter is used to change the color mode or scene of the ambient light. Select a pin from the drop-down list. Note that the specified pin cannot be configured for other features.
Mist keyThis parameter is used to switch between the timer and on/off control. Select a pin from the drop-down list. Note that the specified pin cannot be configured for other features.
Level key pinThis parameter is used to adjust intensity levels or mute sound. Select a pin from the drop-down list. Note that the specified pin cannot be configured for other features. This parameter is configurable only when you select three buttons to use.
Switch between featuresYou can change the intensity level adjustment key to the mode selection key.
Whether to enable the countdown indicatorWhen a delay timer is being set, this indicator is on. The delay timer can be 1h, 3h, or 6h. Select a pin from the drop-down list. Note that the specified pin cannot be configured for other features.
Duty cycles for large, medium, and small mist intensitySet the correct duty cycles according to your circuit design.
Music syncAdd the music sync feature. With music sync, the light can change colors to the beat of music.
Music playThe voltage input pin of the speakerSelect a pin from the drop-down list. Note that the specified pin cannot be configured for other features.
The voltage range of the speakerConfigure it based on your hardware design.