Standard Instruction Set

Last Updated on : 2022-01-18 03:38:33download

This topic describes the standard instruction set of thermostats (wk).

Note: Only the legacy versions support the instructions marked with an asterisk (*).

Code	Name	Data type	Data type	Version
switch	Switch	Boolean	{}	-
mode	Working mode	Enum	{“range”:[“cold”,“hot”,“wind”,“comfortable”,“energy”,“auto”,“holiday”,“eco”,“manual”, “sleep”,“dry”,“program”,“floor_heat”,“auxiliary_heat”]}	-
eco	ECO mode	Boolean	{}	-
anion	Anion	Boolean	{}	-
light	Light	Boolean	{}	-
sound	Sound	Boolean	{}	-
factory_reset	Restore to factory defaults	Boolean	{}	-
window_check	Window detection	Boolean	{}	-
sleep	Sleep function	Boolean	{}	-
frost	Anti-frost function	Boolean	{}	-
valve_check	Valve inspection	Boolean	{}	-
switch_vertical	Vertical swing flap switch	Boolean	{}	-
switch_horizontal	Horizontal swing flap switch	Boolean	{}	-
fan_horizontal	Horizontal swing flap angle	Enum	{“range”:[“30”,“90”]}	-
fan_vertical	Vertical swing flap angle	Enum	{“range”:[“30”,“90”]}	-
temp_set	Target temperature in °C	Integer	{“unit”:“℃”,“min”:5,“max”:40,“scale”:0,“step”:1}	-
upper_temp	Maximum temperature in °C	Integer	{“unit”:“℃”,“min”:20,“max”:40,“scale”:0,“step”:1}	-
lower_temp	Minimum temperature	Integer	{“unit”:“℃”,“min”:0,“max”:20,“scale”:0,“step”:1}	-
temp_set_f	Target temperature in °F	Integer	{“unit”:“℉”,“min”:32,“max”:104,“scale”:0,“step”:1}	-
upper_temp_f	Maximum temperature in °F	Integer	{“unit”:“℉”,“min”:70,“max”:104,“scale”:0,“step”:1}	-
lower_temp_f	Minimum temperature in °F	Integer	{“unit”:“℉”,“min”:32,“max”:70,“scale”:0,“step”:1}	-
capacity_set	Power setting	Enum	{“range”:[“2000W”,“3000W”,“5000W”]}	-
temp_correction	Temperature calibration	Integer	{“min”:-9,“max”:9,“scale”:0,“step”:1}	-
level	Level	Enum	{“range”:[“low”,“middle”,“high”,“auto”,“closed”]}	-
work_days	Working days	Enum	{“range”:[“5_2”,“6_1”,“7”]}	-
holiday_temp_set	Temperature setting in °C in holiday mode	Integer	{“unit”:“℃”,“min”:0,“max”:40,“scale”:0,“step”:1}	-
holiday_temp_set_f	Temperature setting in °F in holiday mode	Integer	{“unit”:“℉”,“min”:32,“max”:104,“scale”:0,“step”:1}	-
holiday_days_set	Number of days in holiday mode	Integer	{“unit”:“day”,“min”:0,“max”:99,“scale”:0,“step”:1}
holiday_set	Time setting in holiday mode	String	{“maxlen”: 255}	-
child_lock	Child lock	Boolean	{}	-
countdown	Countdown	Enum	{“range”:[“cancel”,“1h”,“2h”,“3h”,“4h”,“5h”,“6h”,“7h”,“8h”,“9h”,“10h”,“11h”,“12h”,“13h”,“14h”,“15h”,“16h”,“17h”,“18h”,“19h”,“20h”,“21h”,“22h”,“23h”,“24h”]}	-
sensor_choose	Sensor selection	Enum	{“range”:[“in”,“out”]}	-
backlight	Backlight brightness	Integer	{“unit”:“%”,“min”:0,“max”:100,“scale”:0,“step”:1}	-
backlight_enum	Quick setting of backlight brightness	Enum	{“range”:[“closed”,“half_bright”,“full_bright”]}	-
temp_unit_convert	Temperature unit switching	Enum	{“range”:[“c”,“f”]}	-
c_f	*Temperature unit switching	Enum	{“range”:[“C”,“F”]}	Legacy version only
loop_mode	Loop mode	Enum	{“range”:[“auto”,“indoor_loop”,“outdoor_loop”]}	-
fan_speed_enum	Fan speed mode	Enum	{“range”:[“low”,“mid”,“high”,“off”]}	-

Prev DocThermostat (wk)

Next DocStatus Set: wk