Standard Status Set

Last Updated on : 2021-08-10 03:29:50download

This topic describes the standard status set of motion sensor lights (gyd).

Status to be sent and reported

Code
Name
Data type
Value
switch_led Switch Boolean {}
work_mode Mode Enum {“range”:[“white”,“colour”,“scene”,“music”]}
bright_value Brightness value Integer {“min”:10,“max”:1000,“scale”:0,“step”:1}
temp_value Color temperature value Integer {“min”:0,“max”:1000,“scale”:0,“step”:1}
colour_data Colored light Json {}
scene_data Scene String {}
countdown Countdown Integer {“unit”:“s”,“min”:0,“max”:86400,“scale”:0,“step”:1}
music_data Music light String {}
control_data Dimming String {}
device_mode Device mode Enum {“range”:[“auto”,“manual”]}
cds Photosensitive parameter setting Enum {“range”:[“2000lux”,“300lux”,“50lux”,“10lux”,“5lux”,“now”]}
pir_sensitivity PIR sensitivity Enum {“range”:[“low”,“middle”,“high”]}
pir_delay PIR delay Integer {“unit”:“s”,“min”:5,“max”:3600,“scale”:0,“step”:1}
switch_pir PIR switch Boolean {}
pir_resume_countdown Countdown of PIR Recovery Integer {“unit”:“min”,“min”:0,“max”:480,“scale”:0,“step”:1}
standby_time Standby delay Integer {“unit”:“min”,“min”:1,“max”:480,“scale”:0,“step”:1}
standby_bright Standby brightness value Integer {“unit”:“”,“min”:0,“max”:1000,“scale”:0,“step”:1}
sensorgroup_sync Sync in group Boolean {}
standby_on Standby duration Boolean {}

Status only to be reported

Code
Name
Data type
Value
pir_state Human motion detection status Enum {“range”:[“pir”,“none”]}
battery_state Battery level Enum {“range”:[“low”,“middle”,“high”]}