Standard Status Set

Last Updated on : 2022-02-09 05:12:52download

This topic describes the standard status set of heaters (rs).

Support reporting instructions to the cloud and sending instructions to the device

Code	Name	Data type	Value constraint
countdown_set	Countdown	Enum	{“range”:[“cancel”,“1h”,“2h”,“3h”,“4h”,“5h”,“6h”]}
temp_unit_convert	Temperature unit switching	Enum	{“range”:[“c”,“f”]}
instant_heating	Instant heating	Boolean	{}
water_set	Water level setting	Integer	{“unit”:“L”,“min”:20,“max”:100,“scale”:0,“step”:5}
temp_set	Temperature setting	Integer	{“unit”:“℃”,“min”:20,“max”:60,“scale”:0,“step”:1}
capacity_set	Power setting	Enum	{“range”:[“2000w”,“3000w”,“5000w”]}
switch_microwave	Microwave switch	Boolean	{}
child_lock	Child lock switch	Boolean	{}
night_power	Power supply at night	Boolean	{}
disinfection	Disinfection	Boolean	{}
eco	Eco mode (energy-saving mode)	Boolean	{}
mode	Mode	Enum	{“range”:[“auto”,“manual”,“smart”,“comfortable”,“eco”]}
switch	Switch	Boolean	{}
temp_set_f	Temperature setting(Fahrenheit)	Integer	{“unit”:“℉”,“min”:0,“max”:150,“scale”:0,“step”:1}
timer	Timer	Raw	{}
capacity_expansion	Capacity expansion	Boolean	{}
outage	Water outage	Boolean	{}
smart_change	Smart change	Boolean	{}
cruise_mode	Cruise mode	Enum	{“range”:[“all_day”,“water_control”,“single_cruise”]}
heating_3d	3D fast heating	Boolean	{}

Code	Name	Data type	Value constraint
countdown_left	Remaining time of countdown	Integer	{“unit”:“min”,“min”:0,“max”:360,“scale”:0,“step”:1}
surplus_water	Remaining water quantity	Integer	{“unit”:“ml”,“min”:0,“max”:5000,“scale”:0,“step”:1}
work_state	Working status	Enum	{“range”:[“heating”,“warm”]}
power_consumption	Power consumption	Integer	{“unit”:“kW·h”,“min”:0,“max”:10000,“scale”:0,“step”:1}
temp_current	Current temperature	Integer	{“unit”:“ºC”,“min”:0,“max”:100,“scale”:0,“step”:1}
temp_current_f	Current temperature(Fahrenheit)	Integer	{“unit”:“”,“min”:0,“max”:100,“scale”:0,“step”:1}
gas_consumption	Air consumption	Integer	{“unit”:“”,“min”:0,“max”:100,“scale”:0,“step”:1}
work_life_1	Magnesium rod life	Integer	{“min”:0,“max”:100,“scale”:0,“step”:1}
work_life_2	Liner life	Integer	{“min”:0,“max”:100,“scale”:0,“step”:1}
water_total	Water Consumption	Integer	{“unit”:“L”,“min”:1,“max”:99999,“scale”:0,“step”:1}
fault	Fault	Bitmap	{“label”:[“sys_high_fault”,“sys_low_fault”,“flow_fault”, “power_fault”,“cooling_fault”,“heating_fault”, “temp_dif_fault”,“in_temp_fault”,“eff_temp_fault”, “coil_temp_fault”,“ret_temp_fault”,“news_fault”, “amb_temp_fault”,“lack_water”,“serious_fault”, “sensor_fault”,“motor_fault”],“maxlen”:16}