Standard Status Set

Last Updated on : 2022-03-15 10:23:43download

Status to be sent and reported

Code	Name	Data type	Value
self_checking	Device self-check	Boolean	{}
alarm_volume	Alert volume	Enum	{“range”:[“low”,“middle”,“high”,“mute”]}
alarm_volume	Alert ringtone	Enum	{“range”:[“ringtone_1”,“ringtone_2”,“ringtone_3”,“ringtone_4”,“ringtone_5”]}
alarm_time	Alert duration	Integer	{“unit”:“s”,“min”:1,“max”:60,“scale”:0,“step”:1}

Status only to be reported

Code	Name	Data type	Value
voc_value	Volatile organic compounds (VOC) detection value	Integer	{“min”:0,“max”:999,“scale”:2,“step”:1}
pm25_value	PM2.5 detection value	Integer	{“unit”:“ppm”,“min”:0,“max”:999,“scale”:0,“step”:1}
battery_state	Battery capacity status	Enum	{“range”:[“low”,“middle”,“high”]}
battery_percentage	Battery capacity	Integer	{“unit”:“%”,“min”:0,“max”:100,“scale”:0,“step”:1}
tamper_alarm	Tamper alarm	Boolean	{}
air_quality_index	Air quality index	Enum	{“range”:[“level_1”,“level_2”,“level_3”,“level_4”,“level_5”,“level_6”]}
pm10	PM10	Integer	{“unit”:“ppm”,“min”:0,“max”:999,“scale”:0,“step”:1}
checking_result	Device self-check result	Enum	{“range”:[“checking”,“check_success”,“check_failure”,“others”]}
temp_current	Current temperature in °C	Integer	{“unit”:“℃”,“min”:-400,“max”:2000,“scale”:1,“step”:1}
humidity_value	Humidity value	Integer	{“unit”:“%”,“min”:0,“max”:100,“scale”:0,“step”:1}
co2_value	CO₂ detection value	Integer	{“unit”:“ppm”,“min”:0,“max”:5000,“scale”:0,“step”:1}
ch2o_value	Formaldehyde detection value	Integer	{“min”:0,“max”:100,“scale”:0,“step”:1}
pm1	PM1.0	Integer	{“unit”:“ppm”,“min”:0,“max”:999,“scale”:0,“step”:1}
charge_state	Charging status	Boolean	{}
lifecycle	Service life	Boolean	{}
fault	Fault alert	Bitmap	{“label”:[“fault”,“serious_fault”,“sensor_fault”,“probe_fault”,“power_fault”]}

Prev DocStandard Instruction Set (hjjcy)

Next DocExercise & Health