Standard Status Set

This topic describes the standard status set of smart cameras (sp).

Support reporting instructions to the cloud and sending instructions to the device

Code	Name	Data type	Value constraint
ipc_work_mode	Working mode	Enum	{“range”:[“0”,“1”]}
basic_device_volume	Volume control	Integer	{“min”:1,“max”:10,“scale”:0,“step”:1}
floodlight_lightness	Floodlight brightness	Integer	{“min”:1,“max”:100,“scale”:0,“step”:1}
wireless_batterylock	Battery lock	Boolean	{}
siren_switch	Siren	Boolean	{}
zoom_stop	Stop zooming	Boolean	{}
cry_detection_switch	Cry detection	Boolean	{}
decibel_switch	Sound detection alarm switch	Boolean	{}
record_switch	SD card video recording switch	Boolean	{}
motion_record	SD card video recording mode	Boolean	{}
sd_umount	Unmount the SD card	Boolean	{}
sd_format	SD card formatting	Boolean	{}
device_restart	Remote restart	Boolean	{}
basic_indicator	Status indicator light	Boolean	{}
basic_private	Privacy mode	Boolean	{}
basic_flip	Flip	Boolean	{}
basic_osd	Time watermark	Boolean	{}
basic_wdr	Wide dynamic range (WDR) mode	Boolean	{}
basic_shimmer	Shimmer full color	Boolean	{}
ptz_calibration	PTZ calibration	Boolean	{}
ptz_stop	Stop PTZ	Boolean	{}
cruise_switch	Cruise switch	Boolean	{}
motion_tracking	Motion tracking	Boolean	{}
motion_switch	Motion alarm switch	Boolean	{}
motion_timer_switch	Motion detection mode selection	Boolean	{}
flight_warn_switch	Warning switch	Boolean	{}
flight_pir_a	PIR sensor 1	Boolean	{}
flight_pir_b	PIR sensor 2	Boolean	{}
flight_pir_c	PIR sensor 3	Boolean	{}
floodlight_switch	Floodlight	Boolean	{}
zoom_control	Zoom control	Enum	{“range”:[“0”,“1”]}
decibel_sensitivity	Sound detection sensitivity	Enum	{“range”:[“0”,“1”]}
record_mode	Video recording mode	Enum	{“range”:[“1”,“2”]}
basic_nightvision	IR night vision	Enum	{“range”:[“0”,“1”,“2”]}
basic_anti_flicker	Anti-flicker	Enum	{“range”:[“0”,“1”,“2”]}
ptz_control	PTZ control	Enum	{“range”:[“0”,“1”,“2”,“3”,“4”,“5”,“6”,“7”]}
motion_interval	Alarm interval	Enum	{“range”:[“1”,“3”,“5”]}
motion_sensitivity	Motion detection sensitivity	Enum	{“range”:[“0”,“1”,“2”]}
flight_bright_mode	Brightness mode	Enum	{“range”:[“0”,“1”]}
pir_sensitivity	PIR sensitivity	Enum	{“range”:[“0”,“1”,“2”]}

ipc_work_mode

IPC working mode:

• 0: low power mode
• 1: continuous working mode

Code example:

{
    "commands":[
        {
            "code":"ipc_work_mode",
            "value":"0"
        }
    ]
}

zoom_control

Zoom control:

• 0: decrease the focal length
• 1: increase the focal length

decibel_sensitivity

The sensitivity of the sound detection alarm switch:

• 0: low sensitivity
• 1: high sensitivity

record_mode

Video recording mode:

• 1: record videos for events (motion is detected and then recorded to SD card)
• 2: continuous recording

basic_nightvision

IR night vision setting:

• 0: auto
• 1: off
• 2: on

basic_anti_flicker

Anti-flicker setting

• 0: disable
• 1: 50 Hz
• 2: 60 Hz

ptz_control

PTZ setting:

• 0: up
• 1: upper right
• 2: right
• 3: lower right
• 4: down
• 5: lower left
• 6: left
• 7: upper left

motion_interval

The alarm interval in minutes. Enumeration value. The corresponding minute option is displayed according to the enumeration value.

• 1: 1 minute
• 3: 3 minutes
• 5: 5 minutes

motion_sensitivity

Motion detection sensitivity:

• 0: low sensitivity
• 1: medium sensitivity
• 2: high sensitivity

flight_bright_mode

Brightness mode:

• 0: manual mode
• 1: automatic mode

pir_sensitivity

PIR sensitivity:

• 0: low sensitivity
• 1: medium sensitivity
• 2: high sensitivity

Support reporting instructions to the cloud only

Code	Name	Data type	Value constraint
wireless_electricity	Battery capacity	Integer	{“min”:0,“max”:100,“scale”:0,“step”:1}
wireless_powermode	Power supply	Enum	{“range”:[“0”,“1”]}
sensor_humidity	Humidity	Integer	{“min”:0,“max”:100,“scale”:0,“step”:1}
sensor_temperature	Temperature	Integer	{“min”:0,“max”:50,“scale”:0,“step”:1}
sd_format_state	Formatting status	Integer	{“min”:-20000,“max”:100,“scale”:0,“step”:1}
sd_status	SD card status	Integer	{“min”:1,“max”:5,“scale”:0,“step”:1}
sd_storge	Get the capacity of SD card	String	{“maxlen”:255}

wireless_powermode

Power supply:

• 0: Battery
• 1: utility power (or battery is being charged)

sd_format_state

Formatting status:

Note: A positive value indicates the formatting progress, and a negative value indicates a specific error code.

• 0–100: If the value is from 0 to 100, it means the current formatting progress.
• -2000: the SD card is being formatted.
• -2001: the SD card formatting exception.
• -2002: no SD card.
• -2003: SD card error.

sd_status

The current status of the SD card:

• 1: normal
• 2: exception
• 3: no enough space
• 4: formatting
• 5: no SD card

sd_storge

SD card capacity in kb.

• The first string: total capacity
• The second string: used capacity
• The third string: remaining capacity

Format example: 3503775744|778977280|2718158848