Standard Instruction Set

Last Updated on : 2022-01-17 06:03:35download

This topic describes the standard instruction set of ventilation systems (xfj).

Code Name Data type Value constraint
switch Switch Boolean {}
mode Working mode Enum {“range”:[“auto”,“sleep”,“manual”]}
air_volume Air volume Integer {“unit”:“m3/h”,“min”:0,“max”:1000,“scale”:0,“step”:1}
loop_mode Circulation mode Enum {“range”:[“auto”,“indoor_loop”,“outdoor_loop”]}
supply_fan_speed Air supply speed Enum {“range”:[“off”,“low”,“mid”,“high”]}
exhaust_fan_speed Air exhausting speed Enum {“range”:[“off”,“low”,“mid”,“high”]}
fresh_air_valve Fresh air valve Boolean {}
air_exhaust_fan Exhaust fan Boolean {}
primary_filter_reset Reset the primary filter Boolean {}
medium_filter_reset Reset the medium filter Boolean {}
high_filter_reset Reset the high-efficiency filter Boolean {}
sterilize Sterilization Boolean {}
bypass_function Bypass function Boolean {}
heat Electric auxiliary heating Boolean {}
pm25_set PM2.5 parameter setting Integer {“unit”:“μg/m3”,“min”:1,“max”:999,“scale”:0,“step”:1}
eco2_set eCO2 parameter setting Integer {“unit”:“ppm”,“min”:1,“max”:1000,“scale”:0,“step”:1}
temp_set Temperature setting Integer {“unit”:“℃”,“min”:-50,“max”:50,“scale”:0,“step”:1}
humidity_set Humidity setting Integer {“unit”:“%”,“min”:0,“max”:100,“scale”:0,“step”:1}
tvoc_set TVOC parameter setting Integer {“unit”:“ppm”,“min”:0,“max”:1000,“scale”:2,“step”:1}
air_conditioning air conditioner Boolean {}
backlight Backlight brightness Integer {“unit”:“%”,“min”:0,“max”:100,“scale”:0,“step”:1}
purify_mode Purification mode Enum {“range”:[“high”,“low”]}
purification Purification/dust removal Boolean {}
dehumidifier Dehumidification Boolean {}
defrost Defrost Boolean {}
countdown_set Countdown Enum {“range”:[“cancel”,“0_5h”,“1h”,“1_5h”,“2h”,“2_5h”,“3h”,“3_5h”,“4h”,“4_5h”,“5h”,“5_5h”,“6h”]}
factory_reset Restore factory defaults Boolean {}
child_lock Child lock switch Boolean {}
filter_reset Reset the filter cartridge Boolean {}
fan_speed_enum Air speed Enum {“range”:[“low”,“mid”,“high”,“sleep”]}
anion Negative ion Boolean {}
uv_light UV light Boolean {}
pm10_set PM10 parameter setting Integer {“unit”:“mg/m3”,“min”:0,“max”:999,“scale”:0,“step”:1}