English
English
简体中文
Contact Us
Register
Log In
layoutIndex

Standard Status Set

Last Updated on : 2022-01-17 06:03:29download

This topic describes the standard status set of ventilation systems (xfj).

Support reporting instructions to the cloud and sending instructions to the device

Code Name Data type Value constraint
switch Switch Boolean {}
mode Working mode Enum {“range”:[“auto”,“sleep”,“manual”]}
air_volume Air volume Integer {“unit”:“m3/h”,“min”:0,“max”:1000,“scale”:0,“step”:1}
loop_mode Circulation mode Enum {“range”:[“auto”,“indoor_loop”,“outdoor_loop”]}
supply_fan_speed Air supply speed Enum {“range”:[“off”,“low”,“mid”,“high”]}
exhaust_fan_speed Air exhausting speed Enum {“range”:[“off”,“low”,“mid”,“high”]}
fresh_air_valve Fresh air valve Boolean {}
air_exhaust_fan Exhaust fan Boolean {}
primary_filter_reset Reset the primary filter Boolean {}
medium_filter_reset Reset the medium filter Boolean {}
high_filter_reset Reset the high-efficiency filter Boolean {}
sterilize Sterilization Boolean {}
bypass_function Bypass function Boolean {}
heat Electric auxiliary heating Boolean {}
pm25_set PM2.5 parameter setting Integer {“unit”:“μg/m3”,“min”:1,“max”:999,“scale”:0,“step”:1}
eco2_set eCO2 parameter setting Integer {“unit”:“ppm”,“min”:1,“max”:1000,“scale”:0,“step”:1}
temp_set Temperature setting Integer {“unit”:“℃”,“min”:-50,“max”:50,“scale”:0,“step”:1}
humidity_set Humidity setting Integer {“unit”:“%”,“min”:0,“max”:100,“scale”:0,“step”:1}
tvoc_set TVOC parameter setting Integer {“unit”:“ppm”,“min”:0,“max”:1000,“scale”:2,“step”:1}
air_conditioning air conditioner Boolean {}
backlight Backlight brightness Integer {“unit”:“%”,“min”:0,“max”:100,“scale”:0,“step”:1}
purify_mode Purification mode Enum {“range”:[“high”,“low”]}
purification Purification/dust removal Boolean {}
dehumidifier Dehumidification Boolean {}
defrost Defrost Boolean {}
countdown_set Countdown Enum {“range”:[“cancel”,“1h”,“2h”,“3h”,“4h”,“5h”,“6h”]}
factory_reset Restore factory defaults Boolean {}
child_lock Child lock switch Boolean {}
filter_reset Reset the filter cartridge Boolean {}
fan_speed_enum Air speed Enum {“range”:[“low”,“mid”,“high”,“sleep”]}
anion Negative ion Boolean {}
uv_light UV light Boolean {}
pm10_set PM10 parameter setting Integer {“unit”:“mg/m3”,“min”:0,“max”:999,“scale”:0,“step”:1}

Support reporting instructions to the cloud only

Code Name Data type Value constraint
pm10 PM10 Integer {“unit”:“μg/m3”,“min”:0,“max”:999,“scale”:0,“step”:1}
humidity_outdoor Outdoor humidity Integer {“unit”:“%”,“min”:0,“max”:100,“scale”:0,“step”:1}
temp_outdoor Outdoor temperature Integer {“unit”:“℃”,“min”:-50,“max”:50,“scale”:0,“step”:1}
air_quality Air quality Enum {“range”:[“great”,“good”,“mild”,“medium”,“bad”]}
supply_temp Air supply temperature Integer {“unit”:“℃”,“min”:-50,“max”:50,“scale”:0,“step”:1}
exhaust_temp Air exhausting temperature Integer {“unit”:“℃”,“min”:-50,“max”:50,“scale”:0,“step”:1}
supply_air_vol Air supply volume Integer {“min”:0,“max”:1000,“scale”:0,“step”:1}
exhaust_air_vol Air exhausting volume Integer {“min”:0,“max”:1000,“scale”:0,“step”:1}
primary_filter_life The remaining effective time of the primary filter Integer {“unit”:“%”,“min”:0,“max”:100,“scale”:0,“step”:1}
medium_filter_life The remaining effective time of the medium filter Integer {“unit”:“%”,“min”:0,“max”:100,“scale”:0,“step”:1}
high_filter_life The remaining effective time of the high-efficiency filter Integer {“unit”:“%”,“min”:0,“max”:100,“scale”:0,“step”:1}
countdown_left Remaining time of countdown Integer {“unit”:“min”,“min”:0,“max”:360,“scale”:0,“step”:1}
filter_life Filter life Integer {“unit”:“%”,“min”:0,“max”:100,“scale”:0,“step”:1}
uv_life UV life Integer {“unit”:“%”,“min”:0,“max”:100,“scale”:0,“step”:1}
temp_indoor Indoor temperature Integer {“unit”:“℃”,“min”:0,“max”:50,“scale”:0,“step”:1}
humidity_indoor Indoor humidity Integer {“unit”:“%”,“min”:0,“max”:100,“scale”:0,“step”:1}
tvoc TVOC Integer {“min”:0,“max”:1000,“scale”:0,“step”:1}
eco2 eCO2 Integer {“min”:0,“max”:1000,“scale”:0,“step”:1}
pm25 PM2.5 Integer {“min”:0,“max”:999,“scale”:0,“step”:1}
fault Fault alarm Bitmap {“label”:[“e1”],“type”:“bitmap”,“maxlen”:1}
hcho_sensor_value HCHO parameter Integer {“unit”:“mg/m3”,“min”:0,“max”:1000,“scale”:3,“step”:1}