Firmware Configuration
Last Updated on : 2022-06-20 09:14:10download
Configure firmware
| Parameter types | Parameters | Description |
|---|---|---|
| Device pairing | Pairing button time | Set the time of button-press to trigger pairing, ranging from 1,000 ms to 5,000 ms. |
| Pairing time | Set the timeout period for pairing, which can be 3 or 10 minutes. If a device is not paired within the specified time, it will exit pairing mode. | |
| Pairing reminder mode | Set how the ambient light indicates the pairing mode. | |
| Pairing reminder brightness | Set the brightness of the ambient light for indicating the pairing mode, ranging from 10 to 100. | |
| Pairing reminder color | Set the color of the ambient light for indicating the pairing mode, which can be red, green, and blue. | |
| Lighting configuration options | Color mode | You can set five color modes from gorgeous, colorful, white, red, purple, blue, sky blue, green, and yellow. Users can press the light button to change the color mode. |
| Device pairing | Frequency of PWM | Set a frequency value between 100 to 20,000. The default value of 1,000 is recommended. A high or low frequency might cause flicker. |
| Red drive pin | Select a pin from the drop-down list. Note that the specified pin cannot be configured for other features. | |
| Green drive pin | Select a pin from the drop-down list. Note that the specified pin cannot be configured for other features. | |
| Blue drive pin | Select a pin from the drop-down list. Note that the specified pin cannot be configured for other features. | |
| Frequency of PWM for atomizer disc | Set a frequency value between 100 to 20,000 according to your circuit design. Incorrect frequency might cause the atomizer disc to not work properly. | Atomization drive pin | Select a pin from the drop-down list. Note that the specified pin cannot be configured for other features. | No water light key pin | Detect the falling edge to determine whether lack of water occurs. Select a pin from the drop-down list. Note that the specified pin cannot be configured for other features. | Fan drive pin | Select a pin from the drop-down list. Note that the specified pin cannot be configured for other features. | Buzzer type | Choose active buzzer or passive buzzer. | Active buzzer drive pin | Select a pin from the drop-down list. Note that the specified pin cannot be configured for other features. This parameter is used for active buzzers. | Passive buzzer drive pin | Select a pin from the drop-down list. Note that the specified pin cannot be configured for other features. | Frequency of PWM for passive buzzer | Set a frequency value according to your circuit design. Incorrect frequency might cause the passive buzzer to not work properly. | Work drive pin | When the atomizer disc is working, the indicator is on. Select a pin from the drop-down list. Note that the specified pin cannot be configured for other features. | Light key pin | This parameter is used to change the color mode or scene of the ambient light. Select a pin from the drop-down list. Note that the specified pin cannot be configured for other features. | Mist key | This parameter is used to switch between the timer and on/off control. Select a pin from the drop-down list. Note that the specified pin cannot be configured for other features. | Whether to enable the countdown indicator | When a delay off timer is being set, this indicator is on. The delay timer can be 1h, 3h, or 6h. Select a pin from the drop-down list. Note that the specified pin cannot be configured for other features. | Duty cycles for large, medium, and small mist intensity | Set the correct duty cycles according to your circuit design. |
Is this page helpful?
YesFeedbackIs this page helpful?
YesFeedbackMarketing Cooperation
Business Cooperation
Customer Service
Media Inquiry
© 2024 Tuya Inc.