Flash OTA Firmware Update

This topic describes how to flash the OTA firmware update using the THP10-Z-X backend. For more information about logging in to the backend, see Log in via Serial Port.

1. Install TFTP Server on your computer and place the update file in the directory where TFTP Server resides.

2. Log in to the THP10-Z-X backend using a serial port. For more information, see Log in via Serial Port.

3. In the THP10-Z-X backend, run the following command to download and install the firmware update.

   cd /tmp && tftp <tftp server IP address> -g -l <firmware file name> && unpack -f <firmware file name>

4. After the update is installed, restart the device.