Firmware Configuration
Last Updated on : 2022-03-02 02:05:56download
Configuration list
| Configuration group name | Name | Configurable content | Remarks |
|---|---|---|---|
| Product pairing options | Trigger for the first-time pairing | Flickering after manual toggling of pairing mode/Continuous flickering on power-on/flickering on power-on and then steady on | The way of resetting the network configuration of the product: Flashing after manual switching—When the product is not equipped with a network, it can be normal and always on/when the product is powered on, it will always be flashing when the product is not equipped with a network. Always on after flashing for 3 minutes. |
| - | Number of ON/OFF to reset | The value ranges from 3 to 10 with a pitch of 1 and default value of 3 | The number of on/off operations that trigger reset network pairing. For example, if you sent 3 times, the network pairing will be reset after the switch on/off/on/off/on. |
| - | Pairing time | 3-3min pairing/10-10min network pairing | Configurable 3min network pairing or 10min network pairing. Take 3min pairing for example, after 3min, stop pairing, the light will be the default brightness and is always on state |
| - | Pairing indication | Breathing/flickering | |
| - | Color of pairing indication | RGBC light | Color of pairing indication (5 channels) optional red light, green light, blue light, white light (color temperature adjustable); (4 channels) optional red light, green light, blue light, white light; (3 channels) optional red light, green light, blue light. |
| - | Pairing reminder brightness | The value ranges from 10 to 100 with a pitch of 1 and default value of 50 | When the pairing reminder is breathing, the peak brightness during breathing is pairing reminder brightness, and the trough brightness is the white light minimum brightness. The color of the pairing reminder is white. Or the minimum brightness of the color light when the color of the distribution network reminder is not white. |
| - | Color temperature of pairing indication | The value ranges from 1 to 100 with a pitch of 1 and default value of 100 | When being pairing, the lamp reminds the color temperature when the color is white light, 0 corresponds to warm light, 100 corresponds to cold light, and the value of 0 to 100 represents the corresponding color temperature in the range of warm and cold color temperature. |
| Configuration parameters for lighting | Default light color | RGBC light | After the pairing is successful, or when the pairing mode is always on when the power is on, the initial color when the light is always on (color temperature can be adjusted) can be red, green, blue, and white (color temperature can be adjusted) (5 channels); Optional red light, green light, blue light, white light (4 channels); optional red light, green light, blue light (3 channels); optional white light (color temperature adjustable) (2 channels); optional white light (1 channel). |
| - | Normal brightness | The value ranges from 1 to 100 with a pitch of 1 and default value of 100 | The initial brightness of the always-on indicator after the network pairing is successful or when the pairing mode indicator is always-on. |
| Normal temperature | The value ranges from 1 to 100 with a pitch of 1 and default value of 100 | The initial temperature after the network pairing is successful or when the network pairing indicator is in always-on mode after power-on (0-100: Warm light, cold light). | |
| - | Switch gradual | Yes/No | The mode of light changes when the light is turned on and off. gradual change, jump to apps on or hardware power on, the gradual effect is from off to the specified brightness, the longest change time is 800ms (the amount of change from 0% brightness to 100% ) When app is off, the gradual effect is that the current brightness fades to off, and the longest time is 800ms (the amount of change from 100% brightness to 0%). |
| - | Power-off memory | Yes/No | After the product is powered off and restarted, whether to recover to the last set state, such as color, brightness, color temperature, and scenario mode. |
| Production test process | Repeat production test 1 | Not support/support | Supports repeated entry to production test 1, power-on scans the production test beacon three times (within 5s of power-on time), and re-enters production test 1 after the third power-on. |
| - | The duration of aging test for cool white light | The value ranges from 0 to 40, with a pitch of 5, default value of 20, and unit of min | - |
| - | The duration of aging test for warm white light | The value ranges from 0 to 40, with a pitch of 5, default value of 20 and unit of min | - |
| - | The duration of aging test for colored light | The value ranges from 0 to 40, with a pitch of 5, default value of 10 and unit of min | - |
| Product parameters | White mode minimum brightness | The value ranges from 1 to 100 with a pitch of 1 and default value of 10 | The lowest duty cycle output from the white light I/O or the dedicated IC output. Note that setting the minimum brightness unreasonably may cause the light to flicker. |
| - | White mode maximum brightness | The value ranges from 1 to 100 with a pitch of 1 and default value of 100 | The highest duty cycle output from the white light I/O or the dedicated IC output. |
| - | The min value of colored light | The value ranges from 1 to 100 with a pitch of 1 and default value of 10 | The lowest duty cycle output from the colored light I/O or the dedicated IC output. Note that setting the minimum brightness unreasonably may cause the light to flicker. |
| - | The max value of colored light | The value ranges from 1 to 100 with a pitch of 1 and default value of 100 | The highest duty cycle output from the white light I/O or the dedicated IC output. |
| - | Low power mode | Non-low power mode/low power mode | Whether the module supports entering low power consumption mode in standby to reduce the power consumption of the whole lamp, and cooperate with the hardware driver to meet the T20 low power consumption requirements. |
| - | Product drive mode | pwm driver/SM726EB driver/SM2135E driver/SM2135EH driver/SM2135EJ driver/SM1658CJ driver/SM1658CJ | The method of driving LED lamp beads; PWM drive is SOC module IO port direct drive, white light PWM + color light PWM, using SM16726B IC, white light PWM + color light IIC, using SM2135E IC, white light IIC + color light IIC, using SM2135EH/SM2135EJ IC, white light IIC + color light IIC (can support white light and color light output at the same time), using SM1658CJ driver, white light IIC + color light IIC (1024 levels adjustable) |
| - | Ctrl configure | When the light is turned on, high level is output, while when the light is turned off on the app, low level is output to shut off RGB circuits in some solutions for reducing standby power. | |
| Key configuration—PWM configuration | Color temperature adjustment drive | Cool and warm white (CW) 1: correlated color temperature (CCT) |
CW: Two channels of PWM control cool and warm brightness in two channels respectively. CCT: One PWM controls brightness and the other controls temperature. |
| - | Frequency of PWM | The value ranges from 100 to 20,000 with a pitch of 100 and default value of1,000 | A default value of 1000 is recommended. The too high or too low frequency will cause jitter and stroboscopic effect. |
| - | Red drive pin-R | Auto-adjust according to the selected module | The IO port can be selected according to the pull-down menu, but it cannot be repeated with other pins. Low level is active: when the output is low level, it can drive the hardware to realize the switch tube conduction, and the high level is effective: when the output is high level, it can drive the hardware to realize the conduction of the switch tube. |
| - | Green drive pin-G | Auto-adjust according to the selected module | Same as above |
| - | Blue drive pin-B | Auto-adjust according to the selected module | Same as above |
| - | White drive pin-C/Bright | Auto-adjust according to the selected module | Same as above |
| - | Warm drive pin-W/CCT | Auto-adjust according to the selected module | Same as above |
| Product hardware parameter—IIC configuration | IIC clock signal—IICSCL | Auto-adjust according to the selected module | Select from the pull-down menu and avoid repetition with other pins. |
| - | IIC control data signal—IICSDA | Auto-adjust according to the selected module | Select from the pull-down menu and avoid repetition with other pins. |
| - | IIC red drive channel | Out_1/Out_2/Out_3 | The red LED is connected to the output pin of the IC, which can be adjusted according to the actual selection of lamp bead package RGB sequence and PCB layout. |
| - | IIC green light serial data line | Out_1/Out_2/Out_3 | The green LED is connected to the output pin of the IC, which can be adjusted according to the actual selection of lamp bead package RGB sequence and PCB layout. |
| - | IIC blue drive channel | Out_1/Out_2/Out_3 | The blue LED is connected to the output pin of the IC, which can be adjusted according to the actual choice of lamp bead package RGB sequence and PCB layout. |
| - | IIC white drive channel | Out_4/Out_5 | The white light LED is connected to the output pin of the IC and can be adjusted according to the actual selection of the lamp bead package RGB sequence and PCB layout |
| - | IIC warm drive channel | Out_4/Out_5 | The warm light LED is connected to the output pin of the IC, which can be adjusted according to the actual choice of lamp bead package RGB sequence and PCB layout |
| - | The max current of SM2135E colored light output | The value ranges from 10 to 45 with a pitch of 5 and default value of 50 | Set the maximum output current of SM2135E IC color light, the current that can be set according to the IC protocol must be an integer multiple of 5mA |
| - | The max current of SM2135 white light output | Required value for SM2135E/ The value ranges from 10 to 80 with a pitch of 5 and defaults to 30 | Set the maximum output current of SM2135E IC color light, the current that can be set according to the IC protocol must be an integer multiple of 5mA |
| - | The max current of SM2135EH colored light output | The value ranges from 9.5 to 41 with a pitch of 4.5 | Set the maximum output current of the SM2135EH IC IPL. The IC protocol stipulates that the current that can be set must be an integer multiple of 4.5mA |
| - | The max current of SM2135EH white light output | The value ranges from 3 to 10 with a pitch of 4.8 | Set the maximum output current of the SM2135EH IC white light. The IC protocol stipulates that the current that can be set must be an integer multiple of 4.8mA |
| - | The max current of SM2135 colored light output | The value ranges from 14.3 to 64 with a pitch of 7.1 | Set the maximum output current of SM2135EH IC IPL. The IC protocol stipulates that the current that can be set must be an integer multiple of 7.1mA |
| - | The max current of SM2135EJ white light output | 0 mA /7.3 mA / 14.4 mA/ 21.5 mA / 28.6 mA / 35.7 mA / 42.8 mA/ 50.8 mA /56.7 mA / 63.5 mA / 70.2 mA / 77.0 mA /83.8 mA/90.0 mA | Set the max current of SM2135 white light output |
| - | The max current of BP1658CJ colored light output | The value ranges from 0 to 150 with a pitch of 1 | Set the maximum output current of the BP1658CJ IC IPL. The IC protocol stipulates that the current that can be set must be an integer multiple of 10mA |
| - | The max current of BP1658CJ white light output | The value ranges from 0 to 75 with a pitch of 5 | Set the maximum output current of the BP1658CJ IC white light. The IC protocol stipulates that the current that can be set must be an integer multiple of 5mA. |
| Colored light white balance parameters | Red light white balance parameters | The value ranges from 1 to 100 with a pitch of 1 and default value of 80 | By adjusting the red light gamma parameters, the gamma curve of the red light channel can be adjusted |
| - | Green light white balance parameters | The value ranges from 1 to 100 with a pitch of 1 and default value of 60 | By adjusting the green light gamma parameters, the gamma curve of the green light channel can be adjusted |
| - | Blu-ray gamma parameters | The value ranges from 1 to 100 with a pitch of 1 and default value of 60 | By adjusting the blue light gamma parameters, the gamma curve of the blue light channel can be adjusted |
| - | Red light white balance parameters | The value ranges from 1 to 100 with a pitch of 1 and default value of 100 | By adjusting the white balance parameters, the maximum output current ratio of red, green, and blue light can be adjusted to perform white balance correction. |
| - | Blue light white balance parameters | The value ranges from 1 to 100 with a pitch of 1 and default value of 70 | By adjusting the white balance parameters, the maximum output current ratio of red, green, and blue light can be adjusted to perform white balance correction. |
| - | Blu-ray white balance parameters | The value ranges from 1 to 100 with a pitch of 1 and default value of 75 | By adjusting the white balance parameters, the maximum output current ratio of red, green, and blue light can be adjusted to perform white balance correction. |
Is this page helpful?
YesFeedbackIs this page helpful?
YesFeedbackMarketing Cooperation
Business Cooperation
Customer Service
Media Inquiry
© 2024 Tuya Inc.