WBR3 Module

Last Updated on : 2021-10-15 16:26:44download

WBR3 is a low power embedded Wi-Fi and Bluetooth LE combo module developed by Tuya Smart.

Scope of application

This topic describes relevant information about WBR3 module during MCU connection development.

WBR3 is a low power embedded Wi-Fi and Bluetooth LE combo module developed by Tuya Smart. The module consists of a highly integrated radio-frequency identification (RFID) chip RTL8720CF, with a built-in Wi-Fi network protocol stack and various library functions. WBR3 also has low-power KM4 MCU, WLAN MAC, and 1T1R WLAN. The highest basic frequency is 100 MHz. The module has 256 KB built-in static random access memory (SRAM), 2 MB flash, and numerous peripheral resources. As a real time operating system (RTOS) platform, WBR3 integrates all function libraries of Wi-Fi MAC and TCP/IP protocols. You can develop your own embedded Wi-Fi products.

For more information, see WBR3 Module Datasheet.

Typical application diagram

  • Reference diagram of coordinated processing mode of the module and 3.3 V MCU:

    WBR3 Module

  • Reference diagram of coordinated processing mode of the module and 5 V MCU:

    WBR3 Module

Design specification

  • Module power supply:

    • When the module is in the working mode, the maximum transient current reaches 324 mA. It is recommended that the supply current of the 3.3 V module should exceed 400 mA.
    • In the PCB layout, capacitors C1 and C2 at the power input pin shall be arranged near the power supply pin. The capacitance shall exceed 10 uF.
  • Module pin:

    • There are no special pins. For more information, see WBR3 Module Datasheet.
  • Radio frequency (RF) of the module:

    • The module only supports PCB onboard antennas, and the antenna gain is 2.5 dBi.
    • When a PCB onboard antenna is used in the Wi-Fi module, it is recommended that the distance between the module antenna and other metal parts should be at least 15 mm, in order to optimize the Wi-Fi performance.